Alti Filter Softwall SW Clean Room are inexpensive and easily assembled method of creating a cleanroom. They can range from a Class ISO 8 to a Class ISO3. Stainless stell construction, PVC strips antistatic also for use in Pharmacetiucal prefab wiring, supports with wheels for easy to move are the most common of many available options. Standard height is 2,5 meters but other working heights is offered on request.

These cleanroom Softwall SW are a great solution and allow to work with the best quality for plastic injection molding, pharmaceutical sampling, medical device assembly and any other cleanroom application where a measurable positive pressure is not needed.

A roof with laminar air supply maintains constant pressure throughout the cleanroom. The air introduced first is pre-filtered at high efficiency (G4) and then filtered through HEPA filters Absolute (Efficiency H13 or H14) inserted in our Laminar Flow series LET, LVX or CUP suitably positioned on the ceiling with lighting lamps.

SoftWall SW

• Housing of structure in Aluminium, Stainless Steel Aisi 304 or higher.
  
• Special versions for rooms with limited space.
• Replacement of filter elements simplified.

Options :

• Explosion protected design according to directive 94/9/EG (ATEX).
• Accessories for differential pressure monitoring and General control panel.
• Additional components (
  germicide lamp, special interlocked systems, etc... )
• Control system and motors for special voltages.
• Filter media available in different qualities (e.g. FDA-conform for food industry).
• Produced in many variations to satisfy the demands of many different installation.